Bar Magnet

Magnetic product description and signing method

1. Scope of adaptation:
Magnetic filtration rod (magnetic rod) is mainly used to remove the iron magnetic impurities of powder, granular, and liquid or slurry. It is widely suitable for ceramics, electricity, mining, plastic, chemical, rubber, pharmaceutical, food, environmental protection, pigment, dyes, electronics, metallurgy and other industries.

2. Working principle:
The magnetic rod is made of high -quality stainless steel pipe and high B value rare earth alloy 钕 iron boron, and made of special production methods. It can be combined on a fixed frame to form a magnetic filter. When the iron -containing substance passes, it is attracted by the magnetic rod to firmly adsorb the iron -containing substance on the wall of the magnetic rod to ensure the integrity of the equipment and the safety of the product.

3. Product characteristics:
No energy consumption, pollution -free, can be installed on any position that can be in contact with materials on the production line, saving space, convenient installation. The magnetic stick uses rare earth alloy iron boron boron as a magnetic source. Change customization according to customer use requirements and production site conditions.

4. the method of magnetic sticks:
(Surface material: stainless steel SUS304 or SUS316L)

5. For example:
【FB 12000GS 25 × 200 N M8 × 20-1】
12000GS: Indicates the magnetic requirements of the magnetic rod; 12000GS represents the magnetic rod's magnetic 12000GS; the relationship between the magnetic requirements and the relationship between the outer diameter are as follows.
25 × 200: It means the outer diameter and length of the steel pipe; 25 indicates that the outer diameter of the magnetic rod is 25mm; 200 indicates that the total length of the magnetic rod is 200mm; the relationship between the specifications of the outer diameter and the surface magnetic is as follows.
N: Indicates temperature resistance; there are six types of temperature resistance: ①n: below 80 ℃; ②M: below 100 ° C; ③H: below 120 ℃; ④SH: 150 ° C; ⑤ UH: below 180 ° C. ⑥ EH: below 200 ° C (below shows the maximum temperature resistance of the corresponding specifications).
M8 × 20-1: There are three types of M holes; ① M8 × 20 indicates that there are M8 holes on both ends, and the effective length of the thread is 20mm; The other end is flat; both ends are expressed as -2. ③ If there is no explanation, there is no M hole at both ends. The thread holes are: M6, M8, M10, etc.

Performance parameters:
Magnetic stick specifications and delivery instructions:

The length and specifications of the magnetic stick can be changed arbitrarily according to the requirements of the customer's use. The magnetic rod temperature -resistant level of φ6 ~ φ32mm and the number of magnetic rods of various lengths with φ25 temperature -resistant levels of φ25 is less than 200, which can be delivered within 3 working days. Products, other unconventional products are delivered within 3 weeks.